Belimo actuator 24VAC 70#" 2-10 VDC / 4-20maActuator Type | Non fail-safe |
---|
Control Type | MFT/Programmable |
---|
Electrical Connection | cable |
---|
Direction of Rotation (Motor) | reversible with built-in switch |
---|
Power Consumption (Holding) | 1.3�W |
---|
Power Consumption (Running) | 3.5 W |
---|
Degree of Protection | NEMA�2, UL�Enclosure�Type�2 |
---|
Shaft Diameter | 1/2" to 1.05" round, centers on 1/2" and 3/4" with insert, 1.05" without insert |
---|
Manual Override | external push button |
---|
Application | For proportional modulation of dampers in HVAC systems. Actuator sizing should be
done in accordance with the damper manufacturer?s specifications.
The actuator is mounted directly to a damper shaft up to 1.05" in diameter by means
of its universal clamp, 1/2? self centered default. A crank arm and several mounting
brackets are available for applications where the actuator cannot be direct coupled to
the damper shaft.
The default parameters for 2 to 10 VDC applications of the ?MFT actuator are
assigned during manufacturing. If necessary, custom versions of the actuators can be
ordered. The parameters can be changed by two means: pre-set and custom
configurations from Belimo or on-site configurations using the Belimo PC-Tool
software. |
---|
Servicing | maintenance free |
---|
Power Supply | 24 VAC � 20% 50/60 Hz 24 VDC � 10% |
---|
Transformer Sizing | 6 VA (Class 2 power source) |
---|
Electrical Connection | 18 GA plenum rated cable
1/2? conduit connector
protected NEMA 2 (IP54)
3 ft [1m] 10 ft [3m] 16 ft [5m] |
---|
Overload Protection | electronic throughout 0 to 95� rotation |
---|
Input Impedance | 100 k� (0.1 mA), 500 � 1500 � (PWM, fl oating point, on/off) |
---|
Angle of Rotation | max. 95�, adjustable with mechanical stop electronically variable |
---|
Manual Override | external push button |
---|
Housing | NEMA 2, IP54, UL enclosure type 2 |
---|
Agency Listings | cULus acc. to UL 60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EEC and 2006/95/EC |
---|
Operating Range Y | 2 to 10 VDC, 4 to 20 mA (default) variable (VDC, PWM, fl oating point, on/off) |
---|
Position Indication | reflective visual indicator (snap-on) |
---|
Feedback Output U | 2 to 10 VDC, 0.5 mA max, VDC variable |
---|
Ambient temperature | -22�F to 122�F [-30�C to 50�C] |
---|
Humidity | 5 to 95% RH non condensing (EN 60730-1) |
---|
Running Time | 150 seconds (default) variable (45 to 170 seconds) |
---|
Direction of Rotation | reversible with switch |
---|
Storage temperature | -40�F to 176�F [-40�C to 80�C] |
---|
Power consumption | 3.5 W (1.3 W) |
---|
Operation | The actuator is not provided with and does not require any limit switches, but is
electronically protected against overload. The anti-rotation strap supplied with the
actuator will prevent lateral movement.
The NMB(X) series provides 95� of rotation and a visual indicator indicates position of
the actuator. When reaching the damper or actuator end position, the actuator
automatically stops. The gears can be manually disengaged with a button on the
actuator cover.
The NMB(X)24-MFT actuators use a brushless DC motor, which is controlled by an
Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the
actuator?s rotation and provides a digital rotation sensing (DRS) function to prevent
damage to the actuator in a stall condition.Power consumption is reduced in holding
mode.
Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto
the actuator body for signaling and switching functions. |
---|
Typical Specification | Proportional control damper actuators shall be electronic direct-coupled type, which
require no crank arm and linkage and be capable of direct mounting to a shaft up
to 1.05? diameter. Actuators must provide proportional damper control in response
to a 2 to 10 VDC or, with the addition of a 500 � resistor, a 4 to 20 mA control input
from an electronic controller or positioner. Actuators shall have brushless DC motor
technology and be protected from overload at all angles of rotation. Actuators shall
have reversing switch and manual override on the cover. Run time shall be constant
and independent of torque. Actuators shall be cULus listed, have a 5-year warranty, and
be manufactured under ISO 9001 International Quality Control Standards. Actuators
shall be as manufactured by Belimo |
---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|