Belimo Aircontrols (USA), Inc. NMB24-SR NMB Series Direct Coupled Non-Spring Return Actuat at Controls Central

Belimo Aircontrols (USA), Inc. NMB24-SR NMB Series Direct Coupled Non-Spring Return Actuat

Brand: Belimo Aircontrols (USA), Inc.

SKU: NMB24SR

	Unit Price
List Price	$522.00
Your Price	$234.90	You Save	$287.10 (55.0 %)

In Stock! Ships in 24 hours

Availability: 154

Quantity (required)

NMB Series Direct coupled non-spring return actuator, 70in-lb minimum torque

Actuator Type	Non fail-safe

Control Type	Modulating

Electrical Connection	cable

Running time	95 seconds

Voltage	AC/DC 24ï¿½V

Angle of Rotation	95ï¿½

Direction of Rotation (Motor)	reversible with built-in switch

Power Consumption (Holding)	0.4ï¿½W

Power Consumption (Running)	2.5 W

Degree of Protection	NEMAï¿½2, ULï¿½Enclosureï¿½Typeï¿½2

Shaft Diameter	1/2" to 1.05" round, centers on 1/2" and 3/4" with insert, 1.05" without insert

Torque	90 in-lbs [10 Nm]

Safety Function	NO

Manual Override	external push button

Application	For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. The actuator is mounted directly to a damper shaft up to 1.05" in diameter by means of its universal clamp, 1/2? self centered default. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. The actuator operates in response to a 2 to 10 VDC, or with the addition of a 500 ï¿½ resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for position indication or master-slave applications

Application

For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. The actuator is mounted directly to a damper shaft up to 1.05" in diameter by means of its universal clamp, 1/2? self centered default. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. The actuator operates in response to a 2 to 10 VDC, or with the addition of a 500 ï¿½ resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for position indication or master-slave applications

Weight	1.7 lbs [0.75 kg]

Servicing	maintenance free

Power Supply	24 VAC ï¿½ 20% 50/60 Hz 24 VDC ï¿½ 10%

Transformer Sizing	5 VA (Class 2 power source)

Electrical Connection	18 GA plenum rated cable 1/2? conduit connector protected NEMA 2 (IP54) 3 ft [1m] 10 ft [3m] 16 ft [5m]

Overload Protection	electronic throughout 0 to 95ï¿½ rotation

Input Impedance	100 kï¿½ (0.1 mA), 500 ï¿½

Angle of Rotation	max. 95ï¿½, adjustable with mechanical stop

Manual Override	external push button

Housing	NEMA 2, IP54, UL enclosure type 2

Agency Listings	cULus acc. to UL 60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EEC and 2006/95/EC

Quality Standard	ISO 9001

Operating Range Y	2 to 10 VDC, 4 to 20 mA

Position Indication	reflective visual indicator (snap-on)

Housing Material	UL94-5VA

Ambient temperature	-22ï¿½F to 122ï¿½F [-30ï¿½C to 50ï¿½C]

Noise level	<45dB(A)

Humidity	5 to 95% RH non condensing (EN 60730-1)

Running Time	150 seconds 95 seconds 60 seconds 45 seconds constant independent of load

Direction of Rotation	reversible with switch actuator will move: =CCW with decreasing control signal (10 to 2V) =CW with decreasing control signal (10 to 2V)

Torque	90 in-lb [10 Nm]

Storage temperature	-40ï¿½F to 176ï¿½F [-40ï¿½C to 80ï¿½C]

Power consumption	2.5 W (0.4 W)

Operation	The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement. The NMB(X) series provides 95ï¿½ of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover. The NMB(X)24-SR? actuators use a sensorless brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator?s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition.Power consumption is reduced in holding mode. Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions

Operation

The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement. The NMB(X) series provides 95ï¿½ of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover. The NMB(X)24-SR? actuators use a sensorless brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator?s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition.Power consumption is reduced in holding mode. Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions

Typical Specification	Proportional control damper actuators shall be electronic direct-coupled type, which require no crank arm and linkage and be capable of direct mounting to a shaft up to 1.05? diameter. Actuators must provide proportional damper control in response to a 2 to 10 VDC or, with the addition of a 500 ï¿½ resistor, a 4 to 20 mA control input from an electronic controller or positioner. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have reversing switch and manual override on the cover. If required, actuator will be provided with screw terminal strip for electrical connections (NMX24-SR-T). Run time shall be constant and independent of torque. A 2 to 10 VDC feedback signal shall be provided for position indication. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.

Typical Specification

Proportional control damper actuators shall be electronic direct-coupled type, which require no crank arm and linkage and be capable of direct mounting to a shaft up to 1.05? diameter. Actuators must provide proportional damper control in response to a 2 to 10 VDC or, with the addition of a 500 ï¿½ resistor, a 4 to 20 mA control input from an electronic controller or positioner. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have reversing switch and manual override on the cover. If required, actuator will be provided with screw terminal strip for electrical connections (NMX24-SR-T). Run time shall be constant and independent of torque. A 2 to 10 VDC feedback signal shall be provided for position indication. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.

Product Family

Model Number	Decription	Manufacturer	Price	Avail. Qty
NMB24MFTUS	NMB Series Direct Coupled Non-Spring Return Actuator, 70 in-lb minimum torque	Belimo Aircontrols (USA), Inc.	$297.45	0	Add To Cart
NMB24SR	NMB Series Direct Coupled Non-Spring Return Actuat	Belimo Aircontrols (USA), Inc.	$234.90	154	Add To Cart
NMB24US	NMB Series Direct Coupled Non-Spring Return Actuator, 70 in-lb minimum torque	Belimo Aircontrols (USA), Inc.	Call for Pricing	0	View More Info