Belimo Aircontrols (USA), Inc. AFXUP N4 24-240V, 20Nm, 95, NEMA

SKU: AFXUPN4
Unit Price
List Price$1,854.00
Your Price$834.30You Save$1,019.70 (55.0 %)
Login or Register to view your lower price for this product!
In Stock! Order Soon Ships in 24 hours
Availability: 1

24-240V, 20Nm, 95, NEMA

Actuator TypeSpring return
Control TypeOpen-close only
Electrical Connectioncable
Running time75 seconds
VoltageAC 24...240�V / DC 24...125�V
Angle of Rotation95�
Degree of ProtectionNEMA�4, UL�Enclosure�Type�4
Shaft Diameter1/2" to 1.05" round, centers on 3/4" with insert, 1.05" without insert
Torque180 in-lbs [20 Nm]
Safety FunctionYES
Manual Override5 mm hex crank (3/16" Allen), supplied
Direction of Rotationreversible with CW/CCW mounting
Power Consumption�3.5�W
Power Consumption�7 W
ApplicationFor On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft up to 1.05? in diameter by means of its universal clamp. Maximum of two AF?s can be piggybacked for torque loads of up to 266 in-lbs. Minimum 3/4? diameter shaft and parallel wiring.
WeightISO 9001
Power Supply24...240 VAC -20% / +10%, 50/60 Hz, 24...125 VDC �10%
Power Consumption Running7 W
Power Consumption Holding3.5 W
Transformer Sizing7 VA @ 24 VAC (class 2 power source), 8.5 VA @ 120 VAC, 18 VA @ 240 VAC
Electrical Connection3 ft [1 m], 10 ft [3 m] or 16 ft [5 m] 18 GA appliance cables, with 1/2? conduit connector
Overload Protectionelectronic throughout 0� to 95� rotation
Angle of Rotation95� (adjustable with mechanical end stop, 35� to 95�)
Direction of Rotation (Motor)reversible with CW/CCW mounting
Manual Override5 mm hex crank (3/16? Allen), supplied
Running Time (Motor)<75 sec
Ambient Temperature Range22�F to +122�F [-30�C to +50�C]
Storage Temperature Range-40�F to +176�F [-40�C to +80�C]
HousingNEMA 4, IP66, UL enclosure type 4
Agency ListingscULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/EC
Noise Level (Motor)�50 dB (A)
Quality Standardmaintenance free
Direction of Rotation (Fail-Safereversible with CW/CCW mounting
Position Indicationdial
Running Time (Fail-Safe)20 sec @ -4�F to +122�F [-20�C to +50�C], < 60 sec @ -22�F [-30�C]
Noise Level (Fail-Safe)<62 dB (A)
Housing Materialpolycarbonate
Electrical protectionactuators are double insulated
Humidity100% condensing
Shaft Diameter1/2? to 1.05? round, centers on 3/4? with insert, 1.05? without insert
Torque180 in-lbs [20 Nm] minimum
AF-PAnti-rotation bracket AF/NF.
ZG-DC1Damper clip for damper blade, 3.5? width.
ZG-DC2Damper clip for damper blade, 6? width.
TOOL-068 mm and 10 mm wrench.
PS-100Actuator power supply and control simulator.
KG10ABall joint for 3/8? diameter rod, zinc plated.
KH10Univ. crankarm, slot 21/64? w, for 9/16? to 1? dia. shafts.
SH10Push rod for KG10A ball joint (36? L, 3/8? diameter).
TOOL-0713 mm wrench.
ZG-JSA-31.05? diameter jackshaft adaptor (12? L).
ZG-JSA-11? diameter jackshaft adaptor (11? L).
ZG-JSA-21-5/16? diameter jackshaft adaptor (12? L).
11097-00001Gasket for cable gland (for NEMA 4 models).
43442-00001Cable gland (for NEMA 4 models).
OperationThe AF..UP N4 series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides constant torque to the damper with, and without, power applied to the actuator. The AF..UP N4 series provides 95� of rotation and is provided with a graduated position indicator showing 0� to 95�. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. The AF..UP N4 actuator is shipped at +5� (5� from full fail-safe) to provide automatic compression against damper gaskets for tight shut-off.
Typical SpecificationOn/Off spring return damper actuators shall be direct coupled type which require no crank arm and linkage and be capable of direct mounting to a jackshaft up to a 1.05? diameter. The actuators must be designed so that they may be used for either clockwise or counter clockwise fail-safe operation. Actuators shall be protected from overload at all angles of rotation. If required, two SPDT auxiliary switch shall be provided having the capability of one being adjustable. Actuators with auxiliary switches must be constructed to meet the requirements for Double Insulation so an electrical ground is not required to meet agency listings. Actuators shall be cULus listed and have a 5 year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.

Product Family

Model NumberDecriptionManufacturerPriceAvail. Qty 
AFXUPN4 24-240V, 20Nm, 95, NEMA Belimo Aircontrols (USA), Inc. $834.30 1    Add To Cart

Coming Soon

All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.

UPS Hoilday Delivery Schedule

For more infomation about Returns visit Returns

For more informatrion about Warranty visit Warranty page.

You can also find answers to some common questions on our FAQ page

Reviews

Not reviewed yet, be the first to write one!

Add Review