Act 24vac/dc 90inlb 2-10V 1m Cbl NEMA 4Actuator Type | Non fail-safe |
---|
Electrical Connection | terminals |
---|
Direction of Rotation (Motor) | reversible with built-in switch |
---|
Power Consumption (Holding) | 0.4�W |
---|
Power Consumption (Running) | 2.5 W |
---|
Degree of Protection | NEMA�4X, UL�enclosure�type�4 |
---|
Shaft Diameter | 9/16" to 3/4" round |
---|
Manual Override | external push button |
---|
Application | For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. The actuator is mounted directly to a damper shaft up to 3/4? in diameter by means of its universal clamp. The actuator operates in response to a 2 to 10 VDC, or with the addition of a 500 � resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for position indication or masterslave applications. |
---|
Servicing | maintenance free |
---|
Power Supply | 24 VAC � 20%, 50/60 Hz, 24 VDC � 10% |
---|
Power Consumption Running | 2.5 |
---|
Power Consumption Holding | 0.4 W |
---|
Transformer Sizing | 5 VA (class 2 power source) |
---|
Electrical Connection | Screw terminal (for 26 to 14 GA wire [heater 15 GA wire]), 1/2? conduit connector |
---|
Overload Protection | electronic throughout 0� to 95� rotation |
---|
Input Impedance | 100 k ? for 2 to 10 VDC (0.1 mA), 500 ? for 4 to 20 mA |
---|
Angle of Rotation | Max. 95�, adjustable with mechanical stop |
---|
Direction of Rotation (Motor) | reversible with switch |
---|
Manual Override | external push button |
---|
Running Time (Motor) | 95 sec constant, independent of load |
---|
Ambient Temperature Range | -22�F to 122�F [-30�C to 50�C] |
---|
Storage Temperature Range | -40�F to 176�F [-40�C to 80�C] |
---|
Housing | NEMA 4X, IP66/67, UL enclosure type 4 |
---|
Agency Listings | cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC and 2006/95/EC |
---|
Noise Level (Motor) | <45 dB (A) |
---|
Operating Range Y | 2 to 10 VDC, 4 to 20 mA w/ ZG-R01 (500 ?, 1/4 W resistor) |
---|
Position Indication | pointer |
---|
Ambient Humidity | 5 to 95% RH non condensing (EN 60730-1) |
---|
Shaft Diameter | 9/16? to 3/4? round |
---|
Torque | 90 in-lbs [10 Nm] minimum |
---|
S1A | Auxiliary switch, 1x SPDT, 3A (0.5A inductive) @250 VAC max. |
---|
S2A | Auxiliary switch, 2x SPDT, 3A (0.5A inductive) @250 VAC max. |
---|
P140A GR | Feedback potentiometer 140�. |
---|
P500A GR | Feedback potentiometer 500� |
---|
P1000A GR | Feedback potentiometer 1000� |
---|
P2800A GR | Feedback potentiometer 2800� |
---|
P5000A GR | Feedback potentiometer 5000�. |
---|
P10000A GR | Feedback potentiometer 10000�. |
---|
NSV24 US | Battery back-up module for non-spring return actuators. |
---|
SGA24 | Positioner control for modualting actuators (surface mount). |
---|
ADS-100 | Analog to digital switch for modulating actuators |
---|
ZG-R01 | 4 to 20 mA adaptor, 500�, 1/4 W resistor w 6? pigtail wires |
---|
ZG-X40 | 120 to 24 VAC, 40 VA transformer. |
---|
PTA-250 | Pulse width modulation interface for modulating actuators. |
---|
IRM-100 | Input rescaling module for modulating actuators. |
---|
Operation | The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement. The NMB24-SR-T N4 provides 95� of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover. The NMB24-SR-T N4 actuator uses a sensorless brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator?s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode. Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions. |
---|
Typical Specification | Proportional control damper actuators shall be electronic direct-coupled type,
which require no crank arm and linkage and be capable of direct mounting to a
shaft from 1/4? to 5/8? diameter. Actuators must provide contorl in response
to a control input from an electronic controller or positioner. Actuators
shall have brushless DC motor technology and be protected from overload
at all angles of rotation. Actuators shall have reversing switch and manual
override on the cover. Run time shall be constant and independent of torque.
Actuators shall be cULus listed, have a 5-year warranty, and be manufactured
under ISO 9001 International Quality Control Standards. Actuators shall be as
manufactured by Belimo |
---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|