TECHNICAL SPECIFICATIONS
Display: LCD with a maximum reading of 4000.
Data Hold: Operating on all ranges
Range(RNG): Operating on all autoranges
Overrange: "OL" mark indication.
Auto power off: Approx. 10 minutes.
Measurement rate: 2 times per second, nominal.
Operating environment: 32 to 122°F (0 to 50°C) at <70% R.H.
Storage temperature: -4 to 140°F (-20 to 60°C), 0 to 80% R.H. with battery removed.
Accuracy: Specifications good in ambient conditions of 73°F ±9°F (23°C ±5°) , <75% relative humidity.
Temperature Coefficient: 0.1 × (specified accuracy) per °F/°C; 32 to 66°F (0 to 19°C); 82 to 122°F (28 to 50°C).
Altitude: 6561.7 Feet (2000 meters).
Jaw opening capability: 38mm conductor.
Power: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.
Battery life: 100 hours carbon zinc, 200 hours typical with alkaline.
Accessories: One pair test leads, one pair of small alligator clips, ktype thermocouple, 9V battery (installed), and operating instructions.
Safety: Designed to meet IEC/EN61010-1 and IEC/EN61010- 2-032, CATIII 600V, class II and pollution degree 2, indoor use comply with CE. C-Tick.

DC volts
Ranges: 400mV, 4000mV, 40V, 400V, 600V
Resolution: 0.1mV
Accuracy: ±(0.5% rdg + 2 dgt)
Input impedance: 3MO on V inputs, 10MO on mV input
Overload protection: 600VDC or AC rms
Transient protection: 6kV for 10µ sec

AC volts(50Hz - 500Hz)
Ranges: 4V, 40V, 400V, 600V
Resolution: 1mV
Accuracy: ±(2.0% rdg + 8 dgts) 50 ~ 500Hz
Input impedance: 3MO
Overload protection: 600V DC or AC rms
Transient protection: 6kV for 10µ sec

AC current(50Hz - 60Hz)
Ranges: 40A, 300A
Resolution: 0.01A
DC Accuracy:
±(3.0% rdg + 10 dgts) 0 ~ 300A / 50 ~ 60Hz
Overload protection: 300AAC

DC current
Ranges: 400µA
Resolution: 0.1µA
Accuracy: ±(1.0% rdg + 2 dgt)
Voltage burden: 1V
Overload protection: 500V DC or AC rms

Resistance
Ranges: 400O, 4kO, 40kO, 400kO, 4MO, 40MO
Resolution: 0.1O
Accuracy:
±(1.2% rdg + 4 dgts) on 400O to
400kO ranges
±(1.5% rdg + 4 dgts) on 4MO range
±(3.0% rdg + 5 dgts) on 40MO range
Open circuit volts: -0.45VDC typical,
(-1.2VDC on 400O range)
Overload protection: 500VDC or AC rms

Temperature
Range: -30 to 1000°F (-35 to 600°C)
Resolution: 0.1°
Accuracy: ±1°F (32 to 120°F)
±1% + 1.5°F (-4 to 750°F)
±2% + 4°F (-30 to -4°F, 750 to1000°F)
±1°C (0 to 120°C),
±1% + 1°C (0 to 400°C)
±2% +3°C (-35 to 0°C, 400 to 600°C)
Sensor type: K-type thermocouple
Overload protection: 60 VDC or 30 VAC rms

Continuity
Range: 400O
Resolution: 1O
Audible indication: Less than 25O
Response time: 500ms
Overload Protection: 500VDC or AC rms
Green LED will be on continuously.

Capacitance
Range: 4µF, 40µF, 400µF, 4mF
1mF = 1000µF
i.e: 1.425mF = 1425µF
Resolution: 1nF
Accuracy: ±(3% rdg + 10 dgts) on 4µF range
±(3% rdg + 5 dgts) on 40µF to 400µF ranges
±(5% rdg + 20 dgts) on 4mF range
Input protection: 500VDC or AC rms

Hi-V(voltage) warning
>30VAC/DC meter beeps, red LED blinks.
Non-contact voltage
Senses voltage 24V to 600V AC (50Hz to 60Hz) beeper chirps and big bright red LED comes on, works when meter dial is on any range.

Product Family