Damp.Rotary Quick, 35in-lb, On/Off, 24VActuator Type | Non fail-safe |
---|
Electrical Connection | terminals |
---|
Direction of Rotation (Motor) | reversible with built-in switch |
---|
Power Consumption (Holding) | 0.4�W |
---|
Power Consumption (Running) | 1.5 W |
---|
Degree of Protection | NEMA�2, UL�Enclosure�Type�2 |
---|
Shaft Diameter | 1/4" to 5/8" round, centers on 5/8", 3/4" clamp available |
---|
Manual Override | external push button |
---|
Application | For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. The actuator is mounted directly to a damper shaft from 1/4? up to 5/8? in diameter by means of its universal clamp. Shafts up to 3/4? diameter can be accommodated by an accessory clamp. The actuator operates in response to a 2 to 10 VDC, or with the addition of a 500 � resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for position indication or master-slave applications. |
---|
Servicing | maintenance free |
---|
Power Supply | 24 VAC � 20% 50/60 Hz 24 VDC � 10% |
---|
Transformer Sizing | 3 VA (Class 2 power source) |
---|
Electrical Connection | 3 ft, 18 GA plenum rated cable
1/2? conduit connector
protected NEMA 2 (IP54) |
---|
Overload Protection | electronic throughout 0 to 95� rotation |
---|
Input Impedance | 100 k� (0.1 mA), 500 � |
---|
Angle of Rotation | max. 95�, adjustable with mechanical stop |
---|
Manual Override | external push button |
---|
Housing | NEMA 2, IP54, UL enclosure type 2 |
---|
Agency Listings | cULus acc. to UL 60730-1A/-2-14,
CAN/CSA E60730-1:02,
CE acc. to 2004/108/EEC and 2006/95/EC |
---|
Operating Range Y | 2 to 10 VDC, 4 to 20 mA |
---|
Position Indication | reflective visual indicator (snap-on) |
---|
Feedback Output U | 2 to 10 VDC (max 0.5 mA) |
---|
Ambient temperature | -22�F to 122�F [-30�C to 50�C] |
---|
Humidity | 5 to 95% RH non condensing (EN 60730-1) |
---|
Running Time | 35 seconds, constant independent of load |
---|
Direction of Rotation | reversible with switch actuator will move:
=CCW with decreasing control signal (10 to 2V)
=CW with decreasing control signal (10 to 2V) |
---|
Storage temperature | -40�F to 176�F [-40�C to 80�C] |
---|
Power consumption | 1.5 W (0.4 W) |
---|
S1A, S2A | Auxiliary Switch(es) |
---|
P...A | Feedback Potentiometers |
---|
NSV24 US | Battery Back-Up Module |
---|
ZS-100 | Weather Shield - Steel |
---|
ZS-150 | Weather Shield - Polycarbonate |
---|
TOOL-06 | 8 mm & 10 mm Wrench |
---|
ZS-T | Terminal Cover for NEMA 2 |
---|
P370 | Shaft Mount Auxiliary Switch |
---|
SGA24 | Min positioners in NEMA 4 housing |
---|
SGF24 | Min positioners for flush panel mounting |
---|
ADS-100 | Analog to Digital Switch |
---|
ZG-R01 | Resistor for 4 to 20 mA Conversion |
---|
PTA-250 | Pulse Width Modulation Interface |
---|
IRM-100 | Input Rescaling Module |
---|
ZG-LMSA-1 | Shaft Adaptor for 3/8? Diameter Shafts |
---|
K-LM20 | 3/4? [20 mm] Shaft Clamp |
---|
ZG-LMSA | Shaft Adaptor for 1/2? Diameter Shafts |
---|
Operation | The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement. The LMB series provides 95� of rotation and a visual indicator indicates position of the actuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover. The LMCB24-SR? actuators use a sensorless brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator?s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode. Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions. |
---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|