Spring, 180in-lb, On/Off, 24V| Application | For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft up to 1.05? in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. Maximum of two AF?s can be piggybacked for torque loads of up to 266 in-lbs. Minimum 3/4? diameter shaft and parallel wiring. |
|---|
| AF-P | Anti-rotation bracket AF/NF. |
|---|
| SH8 | Push rod for KG6 & KG8 ball joints (36? L, 5/16? diameter). |
|---|
| ZG-100 | Univ. right angle bracket (17? H x 11-1/8? W x 6? base). |
|---|
| ZG-101 | Univ. right angle bracket (13? H x 11? W x 7-7/16? base). |
|---|
| ZG-DC1 | Damper clip for damper blade, 3.5? width |
|---|
| ZG-DC2 | Damper clip for damper blade, 6? width. |
|---|
| ZS-100 | Weather shield - galvaneal (13? L x 8? W x 6? D). |
|---|
| ZS-150 | Weather shield - PC w/ foam seal (16? L x 8-3/8? W x 4? D). |
|---|
| ZS-260 | Explosion proof housing. |
|---|
| ZS-300 | NEMA 4X, 304 stainless steel enclosure. |
|---|
| TOOL-06 | 8 mm and 10 mm wrench. |
|---|
| AV8-25 | 9.8? shaft extension for 5/16? to 1? diameter shafts. |
|---|
| PS-100 | Actuator power supply and control simulator. |
|---|
| ZG-X40 | 120 to 24 VAC, 40 VA transformer. |
|---|
| ZG-102 | Dual actuator mounting bracket. |
|---|
| IND-AFB | AFB(X)/NFB(X) position indicator. |
|---|
| KG8 | Ball joint for 5/16? diameter rod, 90�, galvanized steel. |
|---|
| KH-AFB | AFB(X)/NFB(X) crankarm (with 3/4? dia. shaft pass through). |
|---|
| ZG-AFB118 | AFB(X)/NFB(X) crankarm adaptor kit. |
|---|
| KG10A | Ball joint for 3/8? diameter rod, zinc plated. |
|---|
| KH10 | Univ. crankarm, slot 21/64? w, for 9/16? to 1? dia. shafts. |
|---|
| SH10 | Push rod for KG10A ball joint (36? L, 3/8? diameter). |
|---|
| ZG-120 | Jackshaft mounting bracket. |
|---|
| ZG-JSA-3 | 1.05? diameter jackshaft adaptor (12? L). |
|---|
| TF-CC US | Cable conduit connector, 1/2?. |
|---|
| ZG-109 | Right angle bracket for ZS-260. |
|---|
| ZG-110 | Stand-off bracket for ZS-260. |
|---|
| ZG-JSA-1 | 1? diameter jackshaft adaptor (11? L). |
|---|
| ZG-JSA-2 | 1-5/16? diameter jackshaft adaptor (12? L). |
|---|
| ZS-101 | Base plate for ZS-100. |
|---|
| ZS-300-5 | NEMA 4X, 316L stainless steel enclosure. |
|---|
| ZS-300-C1 | 1/2? shaft adaptor, standard wtih ZS-300(-5). |
|---|
| ZS-300-C2 | 3/4? shaft adaptor for ZS-300(-5). |
|---|
| ZS-300-C3 | 1? shaft adaptor for ZS-300(-5). |
|---|
| K7-2 | Standard AFB(X)/NFB(X) clamp (1/2? to 1.05?). |
|---|
| KH12 | Univ. crankarm, slot 21/64? w, for 3/4? to 1? dia. shafts. |
|---|
| KH8 | Univ. crankarm,slot 21/64? w,for 3/8? to 11/16? dia. shafts. |
|---|
| Z-AF | Classic AF/NF to AFB(X)/NFB(X) retrofit mounting bracket. |
|---|
| ZG-118 | AFB(X)/NFB(X) U bracket (5-7/8? H x 5-1/2? W x 2-19/32? D). |
|---|
| ZG-AFB | AFB(X)/NFB(X) crankarm adaptor kit. |
|---|
| Operation | The AF..24 series actuators provide true spring return operation for reliable failsafe application and positive close off on air tight dampers. The spring return system provides constant torque to the damper with, and without, power applied to the actuator. The AF..24 series provides 95� of rotation and is provided with a graduated position indicator showing 0� to 95�. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. The AF..24 actuator is shipped at +5� (5� from full fail-safe) to provide automatic compression against damper gaskets for tight shut-off. |
|---|
| Typical Specification | On/Off spring return damper actuators shall be direct coupled type which require no crank arm and linkage and be capable of direct mounting to a jackshaft up to a 1.05? diameter. The actuators must be designed so that they may be used for either clockwise or counter clockwise fail-safe operation. Actuators shall be protected from overload at all angles of rotation. If required, two SPDT auxiliary switch shall be provided having the capability of one being adjustable. Actuators with auxiliary switches must be constructed to meet the requirements for Double Insulation so an electrical ground is not required to meet agency listings. Actuators shall be cULus listed and have a 5 year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo. |
|---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|