Belimo Aircontrols (USA), Inc. AFBUP Spring ret. Act..24...240V, 20Nm, 95° at Controls Central

Belimo Aircontrols (USA), Inc. AFBUP Spring ret. Act..24...240V, 20Nm, 95°

Brand: Belimo Aircontrols (USA), Inc.

SKU: AFBUP

	Unit Price
List Price	$856.00
Your Price	$385.20	You Save	$470.80 (55.0 %)

In Stock! Ships in 24 hours

Availability: 145

Quantity (required)

Damper Actuator,180 in-lb,Spring Return,24 to 240V (UP),On/Off

Application	For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft up to 1.05? in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. Maximum of two AF?s can be piggybacked for torque loads of up to 266 in-lbs. Minimum 3/4? diameter shaft and parallel wiring.

Application

For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft up to 1.05? in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. Maximum of two AF?s can be piggybacked for torque loads of up to 266 in-lbs. Minimum 3/4? diameter shaft and parallel wiring.

AF-P	Anti-rotation bracket AF/NF.

SH8	Push rod for KG6 & KG8 ball joints (36? L, 5/16? diameter).

ZG-100	Univ. right angle bracket (17? H x 11-1/8? W x 6? base).

ZG-101	Univ. right angle bracket (13? H x 11? W x 7-7/16? base).

ZG-DC1	Damper clip for damper blade, 3.5? width.

ZG-DC2	Damper clip for damper blade, 6? width.

ZS-100	Weather shield - galvaneal (13? L x 8? W x 6? D).

ZS-150	Weather shield - PC w/ foam seal (16? L x 8-3/8? W x 4? D).

ZS-260	Explosion proof housing.

ZS-300	NEMA 4X, 304 stainless steel enclosure.

TOOL-06	8 mm and 10 mm wrench.

AV8-25	9.8? shaft extension for 5/16? to 1? diameter shafts. .

PS-100	Actuator power supply and control simulator.

ZG-102	Dual actuator mounting bracket.

IND-AFB	AFB(X)/NFB(X) position indicator.

KG8	Ball joint for 5/16? diameter rod, 90ï¿½, galvanized steel

KH-AFB	AFB(X)/NFB(X) crankarm (with 3/4? dia. shaft pass through).

ZG-AFB118	AFB(X)/NFB(X) crankarm adaptor kit.

KG10A	Ball joint for 3/8? diameter rod, zinc plated.

KH10	Univ. crankarm, slot 21/64? w, for 9/16? to 1? dia. shafts.

SH10	Push rod for KG10A ball joint (36? L, 3/8? diameter).

ZG-120	Jackshaft mounting bracket.

ZG-JSA-3	1.05? diameter jackshaft adaptor (12? L).

TF-CC US	Cable conduit connector, 1/2?.

ZG-109	Right angle bracket for ZS-260.

ZG-110	Stand-off bracket for ZS-260.

ZG-JSA-1	1? diameter jackshaft adaptor (11? L).

ZG-JSA-2	1-5/16? diameter jackshaft adaptor (12? L).

ZS-101	Base plate for ZS-100.

ZS-300-5	NEMA 4X, 316L stainless steel enclosure.

ZS-300-C1	1/2? shaft adaptor, standard wtih ZS-300(-5).

ZS-300-C2	3/4? shaft adaptor for ZS-300(-5).

ZS-300-C3	1? shaft adaptor for ZS-300(-5).

K7-2	Standard AFB(X)/NFB(X) clamp (1/2? to 1.05?).

KH12	Univ. crankarm, slot 21/64? w, for 3/4? to 1? dia. shafts.

KH8	Univ. crankarm,slot 21/64? w,for 3/8? to 11/16? dia. shafts.

Z-AF	Classic AF/NF to AFB(X)/NFB(X) retrofit mounting bracket.

ZG-118	AFB(X)/NFB(X) U bracket (5-7/8? H x 5-1/2? W x 2-19/32? D).

ZG-AFB	AFB(X)/NFB(X) crankarm adaptor kit.

Z-SF	20 piece Z-AF kit.

Operation	The AF..UP series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides constant torque to the damper with, and without, power applied to the actuator. The AF..UP series provides 95ï¿½ of rotation and is provided with a graduated position indicator showing 0ï¿½ to 95ï¿½. The actuator maybe be stalled anywhere in its normal rotation without the need of mechanical end switches. The AF..UP actuator is shipped at +5ï¿½ (5ï¿½ from full fail-safe) to provide automatic compression against damper gaskets for tight shut off.

Operation

The AF..UP series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides constant torque to the damper with, and without, power applied to the actuator. The AF..UP series provides 95ï¿½ of rotation and is provided with a graduated position indicator showing 0ï¿½ to 95ï¿½. The actuator maybe be stalled anywhere in its normal rotation without the need of mechanical end switches. The AF..UP actuator is shipped at +5ï¿½ (5ï¿½ from full fail-safe) to provide automatic compression against damper gaskets for tight shut off.

Typical Specification	On/Off spring return damper actuators shall be direct coupled type which require no crank arm and linkage and be capable of direct mounting to a jackshaft up to a 1.05? diameter. The actuators must be designed so that they may be used for either clockwise or counter clockwise fail-safe operation. Actuators shall be protected from overload at all angles of rotation. If required, two SPDT auxiliary switch shall be provided having the capability of one being adjustable. Actuators with auxiliary switches must be constructed to meet the requirements for Double Insulation so an electrical ground is not required to meet agency listings. Actuators shall be cULus listed and have a 5 year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.

Typical Specification

On/Off spring return damper actuators shall be direct coupled type which require no crank arm and linkage and be capable of direct mounting to a jackshaft up to a 1.05? diameter. The actuators must be designed so that they may be used for either clockwise or counter clockwise fail-safe operation. Actuators shall be protected from overload at all angles of rotation. If required, two SPDT auxiliary switch shall be provided having the capability of one being adjustable. Actuators with auxiliary switches must be constructed to meet the requirements for Double Insulation so an electrical ground is not required to meet agency listings. Actuators shall be cULus listed and have a 5 year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.