Belimo actuator 24V spring return modulating MFT 10Nm 95-degActuator Type | Spring return |
---|
Control Type | MFT/Programmable |
---|
Electrical Connection | cable |
---|
Direction of Rotation (Fail-Safe) | reversible with CW/CCW mounting |
---|
Direction of Rotation (Motor) | reversible with built-in switch |
---|
Power Consumption (Holding) | 3�W |
---|
Power Consumption (Running) | 6.5 W |
---|
Degree of Protection | NEMA�2, UL�Enclosure�Type�2 |
---|
Shaft Diameter | 1/2" to 1.05" round, centers on 1/2" and 3/4" with insert, 1.05" without insert |
---|
Manual Override | 5 mm hex crank (3/16" Allen), supplied |
---|
Servicing | maintenance free |
---|
Power Supply | 24 VAC�20%, 50/60Hz, 24 VDC+20%/-10% |
---|
Power Consumption Running | 6.5 W |
---|
Power Consumption Holding | 3 W |
---|
Transformer Sizing | 9 VA (class 2 power source) |
---|
Electrical Connection | 3 ft [1 m], 18 GA appliance cable with 1/2? conduit connector |
---|
Overload Protection | electronic throughout 0� to 95� rotation |
---|
Input Impedance | 100 k ? for 2 to 10 VDC (0.1 mA), 500 ? for 4 to 20 mA, 1500 ? for PWM, floating point and On/Off |
---|
Angle of Rotation | 95� (adjustable with mechanical end stop, 35� to 95�) |
---|
Direction of Rotation (Motor) | reversible with built-in switch |
---|
Manual Override | 5 mm hex crank (3/16? Allen), supplied |
---|
Running Time (Motor) | 150 sec (default), variable (40 to150 sec) |
---|
Ambient Temperature Range | -22�F to +122�F [-30�C to +50�C] |
---|
Storage Temperature Range | -40�F to +176�F [-40�C to +80�C] |
---|
Housing | NEMA 2, IP54, UL enclosure type 2 |
---|
Agency Listings | cULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02, CE acc. to 2004/108/EC |
---|
Noise Level (Motor) | �40 dB (A) @ 150 sec, run time dependent |
---|
Operating Range Y | 2 to 10 VDC, 4 to 20 mA w/ ZG-R01 (500 ?, 1/4 W resistor), variable (VDC, PWM, floating point, on/off) |
---|
Direction of Rotation (Fail-Safe | reversible with CW/CCW mounting |
---|
Position Indication | visual indicator, 0� to 95� (0� is full spring return position) |
---|
Running Time (Fail-Safe) | < 60 sec @ -22�F [-30�C] |
---|
Noise Level (Fail-Safe) | <62 dB (A) |
---|
Feedback Output U | 2 to 10 VDC, 0.5 mA max, VDC variable |
---|
Housing Material | zinc coated metal and plastic casing |
---|
Electrical protection | actuators are double insulated |
---|
Angle of Rotation Adaptation | Off (default) |
---|
Override Control | min. position = 0% , mid. Position = 50% , max. position = 100% (Default) |
---|
Humidity | max. 95% RH non-condensing |
---|
Shaft Diameter | 1/2? to 1.05? round, centers on 1/2? and 3/4? with insert, 1.05? without insert |
---|
Torque | 90 in-lbs [10 Nm] minimum |
---|
MFT-P | Belimo MFT configuration software (hardware not included). |
---|
ZTH US | Handheld programming tool w/ ZK1-GEN, ZK2-GEN, ZK6-GEN. |
---|
ZK2-GEN | Cable for ZTH US to actuators w/o diagnostics socket. |
---|
AF-P | Anti-rotation bracket AF/NF |
---|
SH8 | Push rod for KG6 & KG8 ball joints (36? L, 5/16? diameter). |
---|
ZG-100 | Univ. right angle bracket (17? H x 11-1/8? W x 6? base). |
---|
ZG-101 | Univ. right angle bracket (13? H x 11? W x 7-7/16? base). |
---|
ZG-DC1 | Damper clip for damper blade, 3.5? width. |
---|
ZG-DC2 | Damper clip for damper blade, 6? width. |
---|
ZS-100 | Weather shield - galvaneal (13? L x 8? W x 6? D). |
---|
ZS-150 | Weather shield - PC w/ foam seal (16? L x 8-3/8? W x 4? D). |
---|
ZS-260 | Explosion proof housing. |
---|
ZS-300 | NEMA 4X, 304 stainless steel enclosure. |
---|
TOOL-06 | 8 mm and 10 mm wrench. |
---|
AV8-25 | 9.8? shaft extension for 5/16? to 1? diameter shafts. |
---|
PS-100 | Actuator power supply and control simulator |
---|
SGA24 | Positioner control for modualting actuators (surface mount). |
---|
SGF24 | Positioner control for modulating actuators (flush mount). |
---|
ADS-100 | Analog to digital switch for modulating actuators |
---|
ZG-R01 | 4 to 20 mA adaptor, 500�, 1/4 W resistor w 6? pigtail wires. |
---|
ZG-X40 | 120 to 24 VAC, 40 VA transformer. |
---|
PTA-250 | Pulse width modulation interface for modulating actuators. |
---|
IRM-100 | Input rescaling module for modulating actuators. |
---|
IND-AFB | AFB(X)/NFB(X) position indicator |
---|
KG8 | Ball joint for 5/16? diameter rod, 90�, galvanized steel |
---|
KH-AFB | AFB(X)/NFB(X) crankarm (with 3/4? dia. shaft pass through). |
---|
ZG-AFB118 | AFB(X)/NFB(X) crankarm adaptor kit. |
---|
KG10A | Ball joint for 3/8? diameter rod, zinc plated. |
---|
KH10 | Univ. crankarm, slot 21/64? w, for 9/16? to 1? dia. shafts |
---|
SH10 | Push rod for KG10A ball joint (36? L, 3/8? diameter). |
---|
ZG-120 | Jackshaft mounting bracket. |
---|
ZG-JSA-3 | 1.05? diameter jackshaft adaptor (12? L). |
---|
TF-CC US | able conduit connector, 1/2?. |
---|
UK24BAC | BACnet gateway module for up to 8 MFT actuators. |
---|
UK24LON | LON gateway module for up to 8 MFT actuators. |
---|
UK24MOD | MODbus gateway module for up to 8 MFT actuators. |
---|
ZG-R02 | 50% voltage divider kit (resistors with wires). |
---|
ZG-SGF | Mounting plate for SGF. |
---|
ZG-109 | Right angle bracket for ZS-260. |
---|
ZG-110 | Stand-off bracket for ZS-260. |
---|
ZG-JSA-1 | 1? diameter jackshaft adaptor (11? L). |
---|
ZG-JSA-2 | 1-5/16? diameter jackshaft adaptor (12? L). |
---|
ZS-101 | Base plate for ZS-100. |
---|
ZS-300-5 | NEMA 4X, 316L stainless steel enclosure. |
---|
ZS-300-C1 | 1/2? shaft adaptor, standard wtih ZS-300(-5). |
---|
ZS-300-C2 | 3/4? shaft adaptor for ZS-300(-5). |
---|
ZS-300-C3 | 1? shaft adaptor for ZS-300(-5). |
---|
K7-2 | Standard AFB(X)/NFB(X) clamp (1/2? to 1.05?) |
---|
KH12 | Univ. crankarm, slot 21/64? w, for 3/4? to 1? dia. shafts. |
---|
KH8 | Univ. crankarm,slot 21/64? w,for 3/8? to 11/16? dia. shafts. |
---|
Z-AF | Classic AF/NF to AFB(X)/NFB(X) retrofit mounting bracket. |
---|
ZG-118 | AFB(X)/NFB(X) U bracket (5-7/8? H x 5-1/2? W x 2-19/32? D). |
---|
ZG-AFB | AFB(X)/NFB(X) crankarm adaptor kit. |
---|
Operation | The NF..24-MFT actuator provides 95� of rotation and is provided with a graduated position indicator showing 0� to 95�. The actuator will synchronize the 0� mechanical stop or the physical damper or valve mechanical stop and use this point for its zero position during normal control operations. A unique manual override allows the setting of any actuator position within its 95� of rotation with no power applied. This mechanism can be released physically by the use of a crank supplied with the actuator. When power is applied the manual override is released and the actuator drives toward the fail-safe position. The actuator uses a brushless DC motor which is controlled by an Application Specific Integrated Circuit (ASIC) and a microprocessor. The microprocessor provides the intelligence to the ASIC to provide a constant rotation rate and to know the actuators?s exact position. The ASIC monitors and controls the brushless DC motor?s rotation and provides a Digital Rotation Sensing (DRS) function to prevent damage to the actuator in a stall condition. The position feedback signal is generated without the need for mechanical feedback potentiometers using DRS. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. The NF..24- MFT is mounted directly to control shafts up to 1.05? diameter by means of its universal clamp and anti-rotation bracket. A crank arm and several mounting brackets are available for damper applications where the actuator cannot be direct coupled to the damper shaft. The spring return system provides minimum specified torque to the application during a power interruption. The NF..24- MFT actuator is shipped at +5� (5� from full fail-safe) to provide automatic compression against damper gaskets for tight shut-off. |
---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|