DCA SPRING 35# 6-9VDC CONTROLServicing | maintenance free |
---|
Power Consumption Running | 3 W |
---|
Power Consumption Holding | 1.5 W |
---|
Transformer Sizing | 6 VA (class 2 power source) |
---|
Electrical Connection | 3 ft [1 m], 18 GA appliance cable with 1/2? conduit connector |
---|
Overload Protection | electronic throughout 0� to 95� rotation |
---|
Angle of Rotation | max. 95�, adjustable with mechanical stop |
---|
Direction of Rotation (Motor) | reversible with built-in switch |
---|
Running Time (Motor) | 150 sec (default), variable (75 to 300 sec) |
---|
Ambient Temperature Range | -22�F to +122�F [-30�C to +50�C] |
---|
Storage Temperature Range | -40�F to +176�F [-40�C to +80�C] |
---|
Agency Listings | cULus acc. To UL 873 and CAN/CSA C22.2 No. 24-93 |
---|
Noise Level (Motor) | <30 dB (A) |
---|
Operating Range Y | 6 to 9 VDC (Default), P-10005 (A05) |
---|
Direction of Rotation (Fail-Safe | reversible with CW/CCW mounting |
---|
Position Indication | visual indicator, 0� to 95� (0� is full spring return position) |
---|
Running Time (Fail-Safe) | <25 sec @ -4�F to 122�F [-20�C to 50�C], <
60 sec @ -22�F [-30�C] |
---|
Noise Level (Fail-Safe) | <62 dB (A) |
---|
Feedback Output U | 2 to 10 VDC, 0.5 mA max, VDC variable |
---|
Housing Material | zinc coated steel |
---|
Electrical protection | actuators are double insulated |
---|
Angle of Rotation Adaptation | Off (default) |
---|
Override Control | min. position = 0% , mid. Position = 50% ,
max. position = 100% (Default) |
---|
Humidity | max. 95% RH non-condensing |
---|
Shaft Diameter | 3/8? to 1/2? round, centers on 1/2? |
---|
Torque | 35 in-lbs [4 Nm] minimum |
---|
MFT-P | Belimo MFT configuration software (hardware not included). |
---|
ZTH US | Handheld programming tool w/ ZK1-GEN, ZK2-GEN, ZK6- GEN. |
---|
ZK2-GEN | Cable for ZTH US to actuators w/o diagnostics socket. |
---|
SH8 | Push rod for KG6 & KG8 ball joints (36? L, 5/16? diameter). |
---|
ZG-DC1 | Damper clip for damper blade, 3.5? width. |
---|
ZG-DC2 | Damper clip for damper blade, 6? width. |
---|
ZS-100 | Weather shield - galvaneal (13? L x 8? W x 6? D). |
---|
ZS-150 | Weather shield - PC w/ foam seal (16? L x 8-3/8? W x 4? D). |
---|
ZS-260 | Explosion proof housing. |
---|
ZS-300 | NEMA 4X, 304 stainless steel enclosure. |
---|
TOOL-06 | 8 mm and 10 mm wrench. |
---|
PS-100 | Actuator power supply and control simulator. |
---|
SGA24 | Positioner control for modualting actuators (surface mount). |
---|
SGF24 | Positioner control for modulating actuators (flush mount). |
---|
ADS-100 | Analog to digital switch for modulating actuators |
---|
ZG-R01 | 4 to 20 mA adaptor, 500�, 1/4 W resistor w 6? pigtail wires. |
---|
ZG-X40 | 120 to 24 VAC, 40 VA transformer |
---|
PTA-250 | Pulse width modulation interface for modulating actuators. |
---|
IRM-100 | Input rescaling module for modulating actuators. |
---|
KG8 | Ball joint for 5/16? diameter rod, 90�, galvanized steel |
---|
KG10A | Ball joint for 3/8? diameter rod, zinc plated. |
---|
SH10 | Push rod for KG10A ball joint (36? L, 3/8? diameter). |
---|
UK24BAC | BACnet gateway module for up to 8 MFT actuators. |
---|
UK24LON | LON gateway module for up to 8 MFT actuators |
---|
UK24MOD | MODbus gateway module for up to 8 MFT actuators |
---|
ZG-R02 | 50% voltage divider kit (resistors with wires). |
---|
ZG-SGF | Mounting plate for SGF. |
---|
ZG-109 | Right angle bracket for ZS-260. |
---|
ZG-110 | Stand-off bracket for ZS-260. |
---|
ZS-101 | Base plate for ZS-100. |
---|
ZS-300-5 | NEMA 4X, 316L stainless steel enclosure. |
---|
ZS-300-C1 | 1/2? shaft adaptor, standard wtih ZS-300(-5). |
---|
ZS-300-C2 | 3/4? shaft adaptor for ZS-300(-5). |
---|
ZS-300-C3 | 1? shaft adaptor for ZS-300(-5). |
---|
KH12 | Univ. crankarm, slot 21/64? w, for 3/4? to 1? dia. shafts. |
---|
KH8 | Univ. crankarm,slot 21/64? w,for 3/8? to 11/16? dia. shafts. |
---|
AV6-20 | 6.7? shaft extension for 1/4? to 3/4? diameter shafts. |
---|
IND-LF | LF position indicator |
---|
K6 US | Standard LF clamp (3/8? to 1/2?). |
---|
K6-1 | LF clamp (1/2? to 3/4?). |
---|
KG6 | Ball joint for 5/16? diameter rod, zinc plated. |
---|
KH6 | Univ. crankarm, slot 1/4? w, for 3/8? to 11/16? dia. shafts. |
---|
KH-LF | LF crankarm (with 1/2? diameter shaft pass through). |
---|
KH-LFV | V-bolt Kit for KH-LF |
---|
LF-P | Anti-rotation bracket LF |
---|
ZDB-LF | Angle of rotation Limiter for LF. |
---|
ZF8-LF | 8x8 mm form fit adaptor for LF. |
---|
ZG-112 | LF right angle bracket (4-1/2? H x 5-1/2? W x 2-1/2? D). |
---|
ZG-LF112 | LF crankarm adaptor kit (includes ZG-112). |
---|
ZG-LF2 | LF crankarm adaptor kit (T bracket included) |
---|
ZG-LMSA-1 | Shaft extension for 3/8? diameter shafts (4? L). |
---|
ZG-LMSA-1/2-5 | Shaft extension for 1/2? diameter shafts (5? L) |
---|
Operation | The LF24-MFT-20 US actuator provides 95� of rotation and is provided with a
graduated position indicator showing 0� to 95�. The actuator will synchronize
the 0� mechanical stop or the damper or valves mechanical stop and use
this point for its zero position during normal control operations.The actuator
uses a brushless DC motor which is controlled by an Application Specific
Integrated Circuit (ASIC) and a microprocessor. The microprocessor provides
the intelligence to the ASIC to provide a constant rotation rate and to know
the actuator?s exact position. The ASIC monitors and controls the brushless
DC motor?s rotation and provides a Digital Rotation Sensing (DRS) function
to prevent damage to the actuator in a stall condition. The position feedback
signal is generated without the need for mechanical feedback potentiometers
using DRS. The actuator may be stalled anywhere in its normal rotation
without the need of mechanical end switches. The LF24-MFT-20 US is mounted
directly to control shafts up to 3/4? diameter (K6-1 clamp) and anti-rotation
bracket. A crank arm and several mounting brackets are available for damper
applications where the actuator cannot be direct coupled to the damper shaft.
The spring return system provides minimum specified torque to the application
during a power interruption. The LF24-MFT-20 US actuator is shipped in
the zero position, compression against seats or gaskets for tight shut-off is
accomplished manually. |
---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|