• Brush DC submotor with electronic stall protection for 2-position models • Self-centering shaft adapter (shaft coupling) for wide range of shaft sizes • Models available for use with two-position, single pole single throw (spst), line- (Series 40) or low- (Series 80) voltage controls • Metal housing with built-in mechanical end limits • Spring return direction field-selectable • Shaft position indicator and scale • Manual winding capability with locking function • UL (cUL) listed and CE compliant • All Models are plenum-rated per UL873FAST ACTING DIR COUP SPRING RETURN| Minimum Driving Torque at 350 F (lb-in.) | 175 lb-in. |
|---|
| Overview | The MS4120F is a 175 lb-in (20Nm), spring return direct-coupled, 120 Vac actuator that accepts two position (SPST) control with an integral junction box. The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. They are de |
|---|
| Application Type | Fire and Smoke |
|---|
| Torque/Force (lb-in., lbf) | 175 lb-in. |
|---|
| Torque/Force (Nm, N) | 20 Nm |
|---|
| Minimum Driving Torque at 175 C (Nm) | 20 Nm |
|---|
| Electrical Connection Length (in.) | 40 in. |
|---|
| Minimum Driving Torque at 350 F (Nm) | 20 Nm |
|---|
| Electrical Connection Length (m) | 1 m |
|---|
| Supply Voltage | 120 Vac ±10% |
|---|
| Fail Safe Mode | Spring Return |
|---|
| Number of Internal Auxiliary Switch | 2 |
|---|
| Control Signal | Two position |
|---|
| Switch Ratings | 250 Vac, 5 A res |
|---|
| Ingress Protection Rating | IP54 |
|---|
| Shaft Adapter Type | Self-centering clamping |
|---|
| Manual operation | Manual crank |
|---|
| Spring Return Torque/Force (lb-in., lbf) | 175 lb-in. |
|---|
| Spring Return Torque/Force (Nm, N) | 20 Nm |
|---|
| Maximum Stall Torque/Force (lb-in., lbf) | 425 lb-in. |
|---|
| Maximum Stall Torque/Force (Nm, N) | 48 Nm |
|---|
| Rotational Stroke | 95 ±3 degrees |
|---|
| Spring Return Direction | By orientation |
|---|
| Timing, Maximum Spring Return (sec) | 15 sec |
|---|
| Timing, Nominal Driving @ 60 Hz (sec) | 15 sec |
|---|
| Compatible Damper Shafts (in.) | 3/8 to 1.06 in. round or 3/8 to 11/16 in. square |
|---|
| Compatible Damper Shafts (mm) | 10 to 27 mm round or 10 to 18 mm square |
|---|
| Materials | Aluminum housing |
|---|
| External Auxiliary Switches Available | No |
|---|
| Power Consumption (Driving) | 0.35A, 35W |
|---|
| Power Consumption (Holding) | 0.15A, 10W |
|---|
| Dimensions (in.) | 10.67 in high x 3.94 in wide x 2.95 in deep |
|---|
| Electrical Connections | Teflon-jacketed cable |
|---|
| Temperature Range, Ambient (F) | -40 F to +130 F |
|---|
| Dimensions (mm) | 271 mm high x 100 mm wide x 75 mm deep |
|---|
| Temperature Range, Ambient (C) | -40 C to +55 C |
|---|
| Temperature Range, Storage (F) | -40 F to +140 F |
|---|
| Temperature Range, Storage (C) | -40 C to +60 C |
|---|
| Maximum Noise Rating, Driving (dB(A) @ 1m) | 70 |
|---|
| Maximum Noise Rating, Holding (dB(A) @ 1m) | 20 (no audible noise) |
|---|
| Environmental Rating | NEMA2 |
|---|
| Approvals, Canadian Underwriters Laboratories | cUL C22.2 No. 24-93 |
|---|
| Approvals, CE | 89/336/ECC, 73/23/EEC |
|---|
| Operating Humidity Range (% RH) | 5 to 95% RH, non-condensing |
|---|
| Approvals, Underwriters Laboratories Inc | UL873, Plenum Rated |
|---|
| Includes | Self-centering shaft adapter, 3mm crank |
|---|
| Comments | Two integral 3/8 in. flexible conduit connections |
|---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|