LF Series Direct coupled spring return actuator, 35 in-lb minimum torqueActuator Type | Spring return |
---|
Control Type | Open-close only |
---|
Electrical Connection | cable |
---|
Direction of Rotation (Fail-Safe) | reversible with CW/CCW mounting |
---|
Direction of Rotation (Motor) | reversible with CW/CCW mounting |
---|
Power Consumption (Holding) | 3�W |
---|
Power Consumption (Running) | 5 W |
---|
Degree of Protection | NEMA�2, UL�Enclosure�Type�2 |
---|
Shaft Diameter | 3/8" to 1/2" round, centers on 1/2" |
---|
Application | For On/Off, fail-safe control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifications. Control is On/Off from an auxiliary contact or a manual switch. The actuator is mounted directly to a damper shaft from 3/8? up to 1/2? in diameter by means of its universal clamp, 1/2? shaft centered at delivery. For shafts up to 3/4? use K6-1 accessory. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. |
---|
Servicing | maintenance free |
---|
Power Supply | 230 VAC � 10%, 50/60 Hz |
---|
Power Consumption Running | 5 W |
---|
Power Consumption Holding | 3 W |
---|
Electrical Connection | 3 ft [1 m], 18 GA appliance cable with 1/2? conduit connector |
---|
Overload Protection | electronic throughout 0� to 95� rotation |
---|
Angle of Rotation | max. 95�, adjustable with mechanical stop |
---|
Direction of Rotation (Motor) | reversible with CW/CCW mounting |
---|
Running Time (Motor) | <40 to 75 sec |
---|
Ambient Temperature Range | -22�F to +122�F [-30�C to +50�C] |
---|
Storage Temperature Range | -40�F to +176�F [-40�C to +80�C] |
---|
Agency Listings | cULus acc. To UL 873 and CAN/CSA C22.2 No. 24-93 |
---|
Noise Level (Motor) | <50 dB (A) |
---|
Direction of Rotation (Fail-Safe | reversible with CW/CCW mounting |
---|
Position Indication | visual indicator, 0� to 95� (0� is full spring return position) |
---|
Running Time (Fail-Safe) | <25 sec @ -4�F to 122�F [-20�C to 50�C], < 60 sec @ -22�F [-30�C |
---|
Noise Level (Fail-Safe) | <62 dB (A) |
---|
Housing Material | zinc coated steel |
---|
Electrical protection | actuators are double insulated |
---|
Humidity | max. 95% RH non-condensing |
---|
Shaft Diameter | 3/8? to 1/2? round, centers on 1/2? |
---|
Torque | 35 in-lbs [4 Nm] minimum |
---|
SH8 | Push rod for KG6 & KG8 ball joints (36? L, 5/16? diameter). |
---|
ZG-DC1 | Damper clip for damper blade, 3.5? width. |
---|
ZG-DC2 | Damper clip for damper blade, 6? width |
---|
ZS-100 | Weather shield - galvaneal (13? L x 8? W x 6? D). |
---|
ZS-150 | Weather shield - PC w/ foam seal (16? L x 8-3/8? W x 4? D). |
---|
ZS-260 | Explosion proof housing. |
---|
ZS-300 | NEMA 4X, 304 stainless steel enclosure. |
---|
TOOL-06 | 8 mm and 10 mm wrench |
---|
PS-100 | Actuator power supply and control simulator. |
---|
KG8 | Ball joint for 5/16? diameter rod, 90�, galvanized steel |
---|
KG10A | Ball joint for 3/8? diameter rod, zinc plated. |
---|
SH10 | Push rod for KG10A ball joint (36? L, 3/8? diameter) |
---|
ZG-109 | Right angle bracket for ZS-260. |
---|
ZG-110 | Stand-off bracket for ZS-260. |
---|
ZS-101 | Base plate for ZS-100. |
---|
ZS-300-5 | NEMA 4X, 316L stainless steel enclosure |
---|
ZS-300-C1 | 1/2? shaft adaptor, standard wtih ZS-300(-5). |
---|
ZS-300-C2 | 3/4? shaft adaptor for ZS-300(-5). |
---|
ZS-300-C3 | 1? shaft adaptor for ZS-300(-5). |
---|
KH12 | Univ. crankarm, slot 21/64? w, for 3/4? to 1? dia. shafts. |
---|
KH8 | Univ. crankarm,slot 21/64? w,for 3/8? to 11/16? dia. shafts. |
---|
AV6-20 | 6.7? shaft extension for 1/4? to 3/4? diameter shafts. |
---|
IND-LF | LF position indicator. |
---|
K6 US | Standard LF clamp (3/8? to 1/2?). |
---|
K6-1 | LF clamp (1/2? to 3/4?). |
---|
KG6 | Ball joint for 5/16? diameter rod, zinc plated. |
---|
KH6 | Univ. crankarm, slot 1/4? w, for 3/8? to 11/16? dia. shafts |
---|
KH-LF | LF crankarm (with 1/2? diameter shaft pass through). |
---|
KH-LFV | V-bolt Kit for KH-LF |
---|
LF-P | Anti-rotation bracket LF. |
---|
ZDB-LF | Angle of rotation Limiter for LF. |
---|
ZF8-LF | 8x8 mm form fit adaptor for LF. |
---|
ZG-112 | LF right angle bracket (4-1/2? H x 5-1/2? W x 2-1/2? D). |
---|
ZG-LF112 | LF crankarm adaptor kit (includes ZG-112). |
---|
ZG-LF2 | LF crankarm adaptor kit (T bracket included). |
---|
ZG-LMSA-1 | Shaft extension for 3/8? diameter shafts (4? L). |
---|
ZG-LMSA-1/2-5 | Shaft extension for 1/2? diameter shafts (5? L). |
---|
Operation | The LF series actuators provide true spring return operation for reliable fail-safe application and positive close off on air tight dampers. The spring return system provides consistent torque to the damper with, and without, power applied to the actuator. The LF series provides 95� of rotation and is provided with a graduated position indicator showing 0� to 95�. The actuator may be stalled anywhere in its normal rotation without the need of mechanical end switches. Power consumption is reduced in holding mode. The actuator is double insulated so an electrical ground connection is not necessary. |
---|
Product Family
Model Number | Decription | Manufacturer | Price | Avail. Qty | |
LF120SUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$288.45
|
180
|
Add To Cart
|
LF120US
|
LF Series Direct Coupled Spring Return Actuator, 3
|
Belimo Aircontrols (USA), Inc.
|
$248.85
|
147
|
Add To Cart
|
LF230SUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$346.50
|
1
|
Add To Cart
|
LF230US
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$306.45
|
6
|
Add To Cart
|
LF243SUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$312.75
|
5
|
Add To Cart
|
LF243US
|
LF Series Direct Coupled Spring Return Actuator, 3
|
Belimo Aircontrols (USA), Inc.
|
$272.70
|
67
|
Add To Cart
|
LF24MFT20US
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$386.55
|
0
|
Add To Cart
|
LF24MFTS20US
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$425.25
|
0
|
Add To Cart
|
LF24MFTSUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$387.90
|
13
|
Add To Cart
|
LF24MFTUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$348.75
|
134
|
Add To Cart
|
LF24SREUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$331.20
|
16
|
Add To Cart
|
LF24SRSUS
|
LF Series Direct Coupled Spring Return Actuator, 3
|
Belimo Aircontrols (USA), Inc.
|
$346.50
|
65
|
Add To Cart
|
LF24SRUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$306.45
|
360
|
Add To Cart
|
LF24SUS
|
LF Series Direct Coupled Spring Return Actuator, 3
|
Belimo Aircontrols (USA), Inc.
|
$263.70
|
135
|
Add To Cart
|
LF24US
|
LF Series Direct Coupled Spring Return Actuator, 3
|
Belimo Aircontrols (USA), Inc.
|
$224.55
|
214
|
Add To Cart
|
LFC243RUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$310.50
|
0
|
Add To Cart
|
LFC243SUS
|
LF Series Direct Coupled Spring Return Actuator, 35 in-lb minimum torque
|
Belimo Aircontrols (USA), Inc.
|
$348.75
|
0
|
Add To Cart
|
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|