•
Replaces over 800 White-Rodgers, Robertshaw and Resideo hot surface ignition models.
• For 120 Vac (up to 5.0A) surface igniter (Norton 201/271 or equivalent).
• S8910U 3000 Series has LED status indicator and microammeter ports for easy trouble shooting
• For local (single rod) or remote (dual rod) rectification type flame sensing.
• Contains easy-to-use cross reference and instructions plus the accessories required to replace the existing hot surface ignition module.
• Provides one or three ignition trials (four-second or seven-second trials) per call for heat.
• Field selectable number of ignition trials and trial time based on unit being replaced.
• Igniter warm up time: 7 (12 seconds second and third trial), 17 (27 seconds second and third trial), 34, or 45 secondsS8910U3000/U Honeywell Universal Hot Surface Ignition ModuleApplications | S8910U3000/U Honeywell Universal Hot Surface Ignition Module is
designed to provide easy field replacement for a wide
range of hot surface ignition modules manufactured by
Resideo, Robertshaw and White-Rodgers. The S8910U
Module provides operating control of a direct ignition
system using a 120 Vac hot surface igniter. The S8910U
replaces existing flame rectification type hot surface
ignition modules with the following characteristics:
• 120 Vac (up to 5A) timed warmup hot surface ignition
elements.
• Single rod (local sense) or dual rod (remote sense) hot
surface ignition.
• One or three ignition trials per call for heat.
• Four-second or seven-second ignition trials.
• Prepurge of 32 seconds or less.
• Up to 96 seconds between trial purge times (three-trial
mode only).
• Natural or LP gas.
The S8910U is not designed to replace:
• Intermittent pilot ignition controls.
• Direct spark ignition controls.
• Proven 120 Vac hot surface ignition controls.
• 24 Vac element hot surface ignition controls.
• 240 Vac input/120 Vac element hot surface ignition
controls.
• 120 Vac timed warmup hot surface ignition controls
— Ignition trial time shorter than four seconds.
— Ignition trial time longer than twelve seconds.
— Edge connectors rather than male quick-connects.
The S8910U package contains the S8910U control, and
easy-to-use instructions, and the accessories required to
adapt the existing hot surface ignition module. The
accessory bag assembly includes the White-Rodgers
adapter, Robertshaw ground lead, four 1/4 in. female .032
quick-connects, one 3/16 in. female .032 quick-connect,
and nine wire labels. The wiring labels are included to
assure proper marking of the wires attached to the
existing module. |
---|
Dimensions (mm) | 133 mm high x 103 mm wide x 49 mm deep |
---|
Flame Sense | Single Rod or Two Rods |
---|
Typical Ignition Hardware | Norton 201, Norton 271, Q354 |
---|
Ambient Temperature Range (F) | -40 F to +175 F |
---|
Ambient Temperature Range (C) | -40 C to +79 C |
---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|