Damp.NEMA4(EFS), 360in-lb,SR (2-10V),24VActuator Type | Electronic fail-safe |
---|
Electrical Connection | cable |
---|
Direction of Rotation (Fail-Safe) | reversible with switch |
---|
Direction of Rotation (Motor) | reversible with built-in switch |
---|
Power Consumption (Holding) | 3�W |
---|
Power Consumption (Running) | 11 W |
---|
Degree of Protection | NEMA�2, UL�Enclosure�Type�2 |
---|
Shaft Diameter | 1/2" to 1.05" round, centers on 3/4" with insert, 1.05" without insert |
---|
Manual Override | external push button |
---|
Application | For fail-safe, proportional control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer?s specifi cations. The actuator is mounted directly to a damper shaft up to 1.05? in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft. The actuator operates in response to a 2 to 10 VDC or, with the addition of a 500? resistor, a 4 to 20 mA control input from an electronic controller or positioner. A 2 to 10 VDC feedback signal is provided for position indication. Not to be used for a master-slave application. |
---|
Servicing | maintenance free |
---|
Power Supply | 24VAC �20% 50/60Hz 24VDC �10% |
---|
Transformer Sizing | 21VA (class 2 power source) |
---|
Electrical Connection | 18 GA plenum rated cable �" conduit connector protected NEMA 2 (IP54) 3 ft [1m] 10 ft [3m] 16 ft [5m] |
---|
Overload Protection | electronic throughout 0 to 95 rotation |
---|
Input Impedance | 100 k� (0.1 mA), 500 � |
---|
Angle of Rotation | max. 95�, adjustable with mechanical stop electronically variable |
---|
Manual Override | external push button |
---|
Housing | NEMA2, IP54, UL enclosure type 2 |
---|
Position Indication | refl ective visual indicator (snap-on) |
---|
Feedback Output U | 2 to 10VDC, 0.5mA max |
---|
Ambient temperature | -22�F to +122�F [-30�C to +50�C] |
---|
Humidity | 5 to 95% RH non-condensing (EN 60730-1) |
---|
Direction of Rotation | reversible with switch |
---|
Bridge Time | 2 second delay before fail-safe activates |
---|
Storage temperature | -40�F to +176�F [-40�C to +80�C] |
---|
Power consumption | 12W (3W) |
---|
Fail-Safe Position | adjustable with dial, 0 to 1 in 10� increments |
---|
Operation range Y | 2 to 10 VDC, 4 to 20mA |
---|
Running time normal operation fail-saf | 150 seconds (default), variable 90 to 150 seconds 35 seconds |
---|
Agency list | cULus acc. to UL 60730-1A/-2-14 CAN/CSA E60730-1:02 CE acc. to 2004/108/EC and 2006/95/EC |
---|
Initial charge | 5 to 20 seconds |
---|
S1A, S2A | Auxiliary Switch(es) |
---|
P...A | Feedback Potentiometers |
---|
ZS-100 | Weather Shield - Steel |
---|
ZS-150 | Weather Shield - Polycarbonate |
---|
ZS-260 | Explosion Proof Housing |
---|
ZG-JSA (-1, 2,3) | Jackshaft Adaptors for Hollow Jackshafts |
---|
ZS-300 (-1) (-5) | NEMA 4X Housing |
---|
PS-100 | Actuator Power Supply Simulator |
---|
P370 | Shaft Mount Auxiliary Switch |
---|
K-GM20 | ?" [20mm] Shaft Clamp |
---|
ZG-102 | Multiple Actuator Mounting Bracket |
---|
ZG-GMA | Crank arm Adaptor Kit |
---|
Operation | The GK..24-SR actuator provides 95� of rotation and a visual indicator shows the position of the actuator. When reaching the damper or actuator end position the actuator automatically stops. The gear can be manually disengaged by pressing the button located on the actuator cover. The GK..24-SR actuators use a brushless DC motor, which is controlled by an Application Specifi c Integrated Circuit (ASIC). The ASIC monitors and controls the actuators rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in a holding mode. The actuator is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement. Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions. |
---|
Typical Specification | Proportional control damper actuators shall be electronic direct-coupled type, which require no crank arm and linkage and be capable of direct mounting to shaft up to 1.05" diameter. Actuators must provide proportional damper control response to a 2 to 10 VDC or, with the addition of a 500� resistor, a 4 to 20 mA control input from an electronic controller or positioner. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have reversing switch and manual override on the cover. Run time shall be constant and independent of torque. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo. |
---|
Fail-Safe Indication | Green LED status indicator light sequence: On: operation ok, no faults Blinking: fail-safe mechanism is active Off: fault is detected or not in operation / capacitors charging |
---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|