120VAC, 1335 in-lb (150Nm) 22sec Prop, 2Aux SW, w/Heater NEMA 4, Manual Override "| Actuator Type | Non fail-safe |
|---|
| Control Type | MFT/Programmable |
|---|
| Electrical Connection | terminals |
|---|
| Degree of Protection | NEMA�4X, UL�enclosure�type�4 |
|---|
| Torque | 1335 in-lbs [150 Nm] |
|---|
| Application | SY Series actuators are fractional horsepower devices, and utilize full-wave
power supplies. Observe wire sizing and transformer sizing requirements.
Proportional models CANNOT be connected to Belimo direct coupled (AF,
AM, GM?etc) actuator power supplies or any type of half-wave device. You
MUST use a separate, dedicated transformer or power supply to power the SY
actuator. Please do not connect other automation equipment to the dedicated
SY supply source. You MUST use four wires (plus a ground) to control a
proportional control SY actuator (See SY Wiring Section). |
|---|
| Servicing | maintenance free |
|---|
| Power Supply | 120 VAC � 10%, 50/60 Hz |
|---|
| Power Consumption Running | 71 W |
|---|
| Transformer Sizing | 84 (class 2 power source) |
|---|
| Electrical Connection | terminal block |
|---|
| Overload Protection | thermally protected 135�C cut-out |
|---|
| Input Impedance | 100 k ? for 2 to 10 VDC (0.1 mA), 500 ? for 4
to 20 mA |
|---|
| Direction of Rotation (Motor) | reversible with built-in switch |
|---|
| Manual Override | hand wheel |
|---|
| Running Time (Motor) | 22 sec |
|---|
| Ambient Temperature Range | -22�F to 150�F [-30�C to 65�C] |
|---|
| Storage Temperature Range | -40�F to 176�F [-40�C to 80�C] |
|---|
| Housing | NEMA 4X, IP66/67, UL enclosure type 4 |
|---|
| Agency Listings | ISO, CE, cCSAus |
|---|
| Noise Level (Motor) | <45 dB (A) |
|---|
| Operating Range Y | 2 to 10 VDC, 4 to 20 mA w/ ZG-R01 (500 ?,
1/4 W resistor) between 0% and 100% |
|---|
| Position Indication | top mounted domed indicator |
|---|
| Feedback Output U | 2 to 10 VDC |
|---|
| Ambient Humidity | 5 to 100% RH (UL Type 4) |
|---|
| Housing Material | die cast aluminum alloy |
|---|
| Auxiliary Switch | 2 x SPDT 3A resistive (0.5A inductive) @ 250
VAC, one set at +10� and one set at 85� |
|---|
| Torque | 1335 in-lbs [150 Nm] minimum |
|---|
| Internal Humidity Control | resistive heating element |
|---|
| Gear Train | high alloy steel gear sets, self locking |
|---|
Product Family
All orders are shipped same-day if the order is received by 1:00 PM Central Time. We ship worldwide.
UPS Hoilday Delivery Schedule
For more infomation about Returns visit Returns
For more informatrion about Warranty visit Warranty page.
You can also find answers to some common questions on our FAQ page
Reviews
Not reviewed yet, be the first to write one!
Add Review
|