Water Leak Detector in a BAPI-Box \ Remote Rope, 50 Foot Cable \ Two 05 Amp Relays \ Flex Connector Fitting
Features:
- Detection Within 5 Seconds with Local LED Alarm Indication
- Alarm Output, Two 5 Amp Relays
- Rope Detects Water Along Its Entire Length
- Automatic or Manual Unit Reset
Specifications:
Power: 24VAC ±10% (If VDC power is required, call your BAPI rep.), 5 Amp Relays: 4 Watt / 4 VA max
Rectification: Half Wave
Wiring:
Screw Terminals: 2 to 4 pair of 12 to 22AWG (BAPI recommends 16 to 22AWG).
Water Detection Sensor: 2 wires (provided), optional Flex Connector or Liquid Tight Fitting for strain relief.
Attached Sensor: Sensor w/ adjustable depth screw from 0.063 to 0.84” (1.60 to 21.34mm)
Remote Sensor: Sensor w/ adjustable depth screw from 0.062 to 0.5” (1.57 to 12.70mm)
(Attached and Remote Sensors are designed to be mounted to flat surfaces or on the rims of drip pans.)
Latching and Supervised Relay Options:
Latching.............Relays stay in alarm until manually reset or power is cycled
Non-Latching .....Relays automatically reset after water is removed (default)
Unsupervised.....Relays energize on water detection
Supervised.........Relays de-energize on water detection (default) Note: Relay de-energizes on loss of power
Reset Action: If latching, local pushbutton or power interrupt
Local Indication: One green power LED, one red alarm LED
Alarm Relay Contacts:
LDT4: Two SPDT, 5 Amp relay outputs
Operating Environment
Remote Sensor: -4 to 158ºF (-20 to 70ºC), 0 to 100%RH, condensing
Detector in BAPI-Box: -4 to 158ºF (-20 to 70ºC), 0 to 95%RH, non-condensing
Enclosure Material and Ratings: NEMA 4 (IP66), UV-resistant polycarbonate, UL94 V-0
Agency: RoHS, UL
Water Leak Detector in a BAPI-Box \ Remote Rope, 50 Foot Cable \ Two 05 Amp Relays \ Flex Connector Fitting
The Water Leak Detector is designed to sense the presence of water and alert a central monitoring system of the potentially destructive situation.
Upon water detection, the alarm output relays change state, and a local red LED illuminates. The sensor detects dirty and purified water, deionized water, distilled.
Rope Sensor Mounting Bracket
The BAPI Rope Sensor Mounting Bracket is specifically designed to hold the rope taut and prevent rope slippage allowing for maximum contact with the monitored surface. Brackets can be easily mounted to flat surfaces, utilizing the industrial adhesive backing or the built-in screw holes.