Water Leak Detector in a BAPI-Box \ Attached Probe \ Two 05 Amp Relays \ No Fitting
Features:
- Detection Within 5 Seconds with Local LED Alarm Indication
- Alarm Output, Two 5 Amp Relays
- Rope Detects Water Along Its Entire Length
- Automatic or Manual Unit Reset
Specifications:
Power: 24VAC/VDC ±10%, 3.9VA max @ 24VAC, 90mA max @ 24VDC (Reverse Polarity Protected) Note: This unit does not require a separate isolated power supply.
Rectification: Half Wave
Wiring: Screw Terminals: 2 to 4 pair of 12 to 22AWG (BAPI recommends 16 to 22AWG). Rope Sensor: 2 wires (provided), optional Flex Connector or Liquid Tight Fitting for strain relief
Rope Sensor Specifications: Plenum-rated sensor cable, detects 1/8” of water. Max length: 100’ (30.5m) Alarm Reset Action: Field selectable for Auto (Non-Latching) or Manual (Latching) Local Indication: One green power LED, one red alarm LED
Alarm Relay Contacts: Two SPDT, 5 Amp relay outputs
Operating Environment Rope Sensor: 32 to 167ºF (0 to 75ºC) Detector (BB): -4 to 158ºF (-20 to 70ºC), 0 to 95%RH, non-condensing
Enclosure Material and Ratings: NEMA 4 (IP66), UV-resistant polycarbonate, UL94 V-0
Agency: CE 61326-1:2013 EMC (Industrial Electromagnetic Environment), RoHS, UL
Water Leak Detector in a BAPI-Box \ Attached Probe \ Two 05 Amp Relays \ No Fitting
The Water Leak Detector is designed to sense the presence of water and alert a central monitoring system of the potentially destructive situation. Upon water detection, the alarm output relays change state, and a local red LED illuminates. The sensors detect dirty and purified water, deionized water, distilled water and reverse osmosis (RO) water.